Mercedes Spare Parts:Spare parts of clutch Mercedes C-class W202.

Today Mercedes Spare Parts tells about mercedes spare parts Mercedes C-class W202. Accessories mercedes spare parts clutches Mercedes C-class W202 is the press the clutch plate, a clutch plate (a spent disk) and a hydraulic control system. Press and spent disks are located on engine flywheel engine Mercedes C-class W202 wheel. The full list mercedes spare parts Mercedes C-class W202 can be found a clutch plate in Archive Mercedes Spare Parts.




Fig.1. Spare parts of clutch Mercedes C-class W202.
1. Сlutch disk
2. Press a disk
3 Bearing clutch deenergizing
4. Plug of deenergizing of clutch
5. Screw with internal six cut, 25 Н.м.






Press it is connected with flywheel a wheel which is screwed together with turned mine of the engine. Between a disk of the press of clutch which is wrung out by a disk of the press of clutch toflywheel to a wheel. A spent disk the ally the gear primary mine of drive Mercedes C-class W202.
Read more...
-------------------------------------------------------------------------------------------------------------------

Mercedes Spare Parts: Scheme of circulation of a cooling liquid Mercedes W203.

Fig.1.Mercedes Spare Parts: Scheme of circulation of a cooling liquid Mercedes W203.

1 - radiator;
2 - broad tank with a cover;
3 - silicone an element;
4 - tank of a liquid for a screen wiper (it is warmed with a cooling liquid);
5 - radiator of a heater of salon;
6 - coupled gate of adjustment of heating;
7 - block of cylinders;
8 - pump of a cooling liquid;
9 - thermostat; And - giving; In - an exit



Mercedes spare parts the cooling system serves for maintenance of normal temperature of work of the engine. It includes a radiator with the thermostat; branch pipes and channels in the block and a head of cylinders in which the cooling liquid circulates. The scheme of circulation of a cooling liquid depends on its temperature and is regulated by the thermostat. Mercedes spare parts at start of the cold engine the cooling liquid at first circulates on a small contour which is limited to the engine and heating system. The cooling liquid circulates in the engine. So the engine is warmed up faster.Mercedes spare parts a radiator connected only when the cooling liquid will reach certain temperature.

Read more...

--------------------------------------------------------------------------------------------------------

Mercedes spare parts:Hydraulic 6-step check point«Sequentronic» Mercedes W203 1998.

Fig.1.Mercedes Spare Parts:Hydraulic 6-step check point «Sequentronic» Mercedes W203 1998.

1 - Lever of deenergizing of coupling
2 - Switch of recognition of transfer
3 - Primary shaft of a check point
4 - Hydropump
5 - Tank
6 - Hydraulic block


The car can be equipped automated by a check point «Sequentronic» mercedes spare parts or automatic transmission. Positions of the lever of the selector are transferred by electric way to the block of management of hydrosystem of transmission.

Read more...
----------------------------------------------------------------------------------------------------------

Mercedes spare parts: hydraulica contour and elements of the car of a steering sensitive to speed Mercedes w124 C-class.

Fig.1.Mercedes spare parts:The hydraulica contour and elements of the car of a steering sensitive to speed Mercedes w124 C-class.

4a - Bar
4b - Leading gear wheel
4i - Operating plug
4j - Transfer Stick
4k - Blade a shutter
A - Under pressure
B - Without pressure
I - the Right executive cylinder (the left turn)
II - the Left executive cylinder (the right turn)
Y10 - Electromagnetic valve SPS
N47 - Management Block stabilising systems



The steering consists from mercedes spare parts a steering wheel, a steering column, the steering mechanism in a kind toothed rack transfer and draughts of a steering drive. Mercedes spare parts. The steering column transfers steering wheel movements to the steering mechanism. Gear stick the steering mechanism according to steering wheel turn moves to the right or to the left. Steering draughts through hinges and a rotary fist transfer steering efforts to forward wheels.

Read more...


------------------------------------------------------------------------------------------------------

Mercedes Spare Parts:Ignition and engine management system С240 and С320 Mercedes w124

Fig.1.Mercedes spare parts.The cores data and security measures
Ignition coils systems С240 and С320 Mercedes w124.(4-cylinder petrol engine)
1 - Forward cover of the engine
2 - Bolt
3 - Prorate
4 - Cover of coils of ignition
5 - Bolt М6х25, 9Нм
6 - Ignition Coil
7 - Spark plug Tip
8 - Spark plug the Engine 111: 28Нм
Engine 271: 25Нм
6-cylinder petrol engine
10 - Ignition Coil
11 - Spark plug, 28Нм
12 - Bolt, 8Нм
13 - Cable of ignition with the spark plug tip, from the ignition coil to a spark plug


Fig.2.Mercedes spare parts.scheme arrangements of components of control systemsС240 and С320 Mercedes w124.


1 - Forward block of management of a choice and signal registration (SAM) with a box of relays/safety locks and the system relay secondary air
2 - Module of the relay of the fan
3 - ECM
4 - Block of management SAM with a box of relays/safety locks and the relay of a starter
5 - Gauge-switch of a pedal of coupling
6 - Socket DLC
7 - Gauge of position of a pedal
8 - Back block of management SAM with a box of relays/safety locks and the relay of the fuel pump



The ignition system develops sparks which make firing of a mix soaked up fuel-air. For this purpose in coils of ignition pressure 12 In will be transformed to pressure 30000 Century
Mercedes spare parts the electronic system of direct ignition is a part of a control system of the engine and includes spark plugs, mercedes spare parts and also coils of ignition with the built in tips of spark plugs. At the 6-cylinder engine of the coil of ignition and tips of spark plugs are connected by a short cable.

Read more...

---------------------------------------------------------------------------------------------------

Mercedes spare parts hydraulic brake system Mercedes w124.

Mercedes Spare Parts continues to tell about the device and service Mercedes w124, a C-class.Today we will consider mercedes spare parts hydraulic brake system block ABS Mercedes w124 a C-class.
Mercedes spare parts hydraulic brake system block ABS both disk brakes of front lines and back wheels consists of the main brake cylinder, the brake amplifier. The hydraulic brake system is divided into two contours. One contour influences brakes of the lobby, the second contour - back wheels. In refusal of one of contours mercedes spare parts, for example, owing to liquid leak, automobile braking is executed by other contour. Pressure of a liquid in both contours is created by the double main brake cylinder working from a pedal of a brake.



Fig.1: Mercedes Spare Parts:Hydraulic elements brake and auxiliary systems Mercedes w124.
1 - Two-planimetric hydraulic brake system
5a - Support of the brake mechanism of the right forward wheel
5b - Support of the brake mechanism of the left forward wheel
6a - Support of the brake mechanism of the right back wheel
6b - Support of the brake mechanism of left back wheel
A7/7 - Amplifier of emergency braking
b1 - Gauge of a course of diaphragm
s1 - Gauge-switch
y1 - Electromagnetic valve
N47-5 - The Block of management
S11 - The Gauge-switch of level of a brake liquid


Read more...

----------------------------------------------------------------------------------------------

Mercedes spare parts: forward bridge Mercedes w124

Fig.1.Mercedes Spare Parts:resetting spare parts of front wheels Mercedes w124 a C-class.

1. Body
2. Top lever of a suspension bracket
3. Rotary fist
4. Brake disk
5. Bottom lever of a suspension bracket
6. Head of cross-section steering draught
7. Spring
8. Shock-absorber
9. Steering mechanism
10. Steering skid foot




Mercedes Spare Parts continues to tell about the device and service Mercedes w124, a C-class.Today we will consider mercedes spare parts suspenders of front wheels Mercedes w124 a C-class.
Wheels fasten on two triangular levers: the top lever through rubber support is connected to a body, the bottom lever is fixed on a bearing beam of the bridge. Both levers through hinges conduct a rotary fist mercedes spare parts. The spring and the gas shock-absorber are fixed separately from each other on the bottom lever of a suspension bracket. Unlike the standard designs the shock-absorber is not used as a leading element of a suspension bracket that provides timely operation and smoothness of a course. The stabilizer of cross-section stability provides the best coupling of forward wheels with road, first of all, on turns.

Read more...

-----------------------------------------------------------------------------------------------

Mercedes Spare Parts:petrol engines Mercedes-Benz C-Class

Mercedes Spare Parts offers beginning automobile owners the general data on the device of their car. Today Mercedes Spare Parts tells about a fuel system car.
Into structure of fuel system enter: established in a back part of the car (under a pillow of a back seat) a fuel tank with an adsorber on the activated coal, the electric fuel pump, and also the electronic system of consecutive injection operated the block of management. The function chart of a control system and an arrangement of gauges are presented on accompanying illustrations.


Fig.1.Mercedes Spare Parts: mercedes spare parts a fuel system С-class Mercedes.
1 -Socket of measurement of pressure of fuel
2 -Fuel highway
3 -Fuel tank
4 -Coal adsorber
5 -Fuel filter with the built in regulator of pressure
6 -Line of giving of fuel in the engine
7 -Valve of management of an adsorber purge

Read more...
------------------------------------------------------------------------------------------------

Mercedes Spare Parts: Assemblage of salon of cars of the C-class

Fig.1.Mercedes spare parts: seating of the basic knots of interior
1. Covering
2. Hooks
3. Keeping clips
4. Plug-in clip
5. Shelf for hats
6. Bolt
7. Detail of fastening of a seat belt

Assemblage spare parts of salon of cars of the mercedes C-class is executed carefully, only separate ordinary-looking plastic spare parts spoil impression a little. In Mercedes of all years of release a sled of the hatch of a roof is badly adjusted, occurrence of scratches in an operating time of a drive of the hatch is possible. Besides, in all cars there can be a noise at work systems of ventilation of salon, and also deformation (swelling) of the top part of plastic at the basis of forward lateral glasses after 1-2 years of operation. Last phenomenon is especially characteristic for cars of release of 1993.Mercedes Spare Parts gives a good advice on selection and replacement mercedes spare parts, for improvement of quality of assembly of interior.
Read more...

----------------------------------------------------------------------------------------------

Mercedes Spare Parts: removal of a head of the cylinder block of Mercedes-Benz W124 1985-1995.

----------------------------------------------------------------------------------------------------

Design of engines of Mercedes-Benz W124 with four, five and six cylinders similarly except for quantity of cylinders. Engines have straight an arrangement of cylinders with one top cam shaft. On the 4-cylinder engine the bent shaft leans against five main bearers, and the axial backlash is regulated by the persistent half rings established from two parties of a main bearer № 3. On the 5-cylinder engine the bent shaft leans against six main bearers, and persistent half rings are located from two parties of the bearing № 4. On the 6-cylinder engine the bent shaft leans against seven main bearers, and persistent half rings are located from two parties of the bearing № 5. The prevention For removal of a head of the cylinder block it is necessary to use the load-lifting gear.
At installation of a head of the cylinder block it is necessary to use a new layer pad. For fastening of the bearing of the cam shaft steering inlet valves, it is necessary to use a new bolt.


Fig.1. Spare parts heads of the cylinder block of Mercedes-Benz W124.
1 - cylinder block head; 2 - bearing cap; 3 - vortical chamber; 4 - nut of fastening of the vortical chamber; 5 - directing valves; 6 - oil catch caps; 7 - saddles of valves; 8 - cover of head of the cylinder block; 9 - cover gasket of a head of the cylinder block








Fig.2. Use of the special tool (1) for discharging of a fixing buckle (2) from joint of an elbow of a cooling fluid with an oil cooler .





In detail order of removal spare parts heads of the cylinder block of Mercedes-Benz W124 look here :http://mersedesspareparts.50webs.com.
----------------------------------------------------------------------------------------------------

Mercedes Spare Parts: repair of suspender of front wheels of Mercedes-Benz W203 2000-2007.

----------------------------------------------------------------------------------------------------

C-class The second generation has been presented public in 2000. The sedan debuted with petrol V5 and V6, and diesel engine V4 and V5. V6 engines have been inherited from previous S-series W202. However, volumes of engines have been increased with 2.6 L. To 3.2 L. With the increased capacity in 215 h.p. Mechanical box with 6 drives was equipped practically on all models (except for C320 and C270CDI). C-class It was updated in the beginning of 2004. This year the interior has endured change in all three types of models. New tail lights have been offered on Sportcoupe and some new engines have appeared later this year. New C350 reached capacities in 268 h.p., and C320 CDI in 221 h.p. New engines were equipped with an automatic transmission under the name 7G-TRONIC. The semi-automatic box went as an option. C32 AMG it has been replaced new 5.5 V8 C55AMG. The engine was the modifed version with E-class'a with capacity in 362 h.p.The maximum speed has been limited by electronics to 250 km/h, and 100 km/h was reached for 4.8 seconds. As always a wide number mersedes spare parts was offered.
The suspender of front wheels consists of the following spare parts.
Fig.1. Spare parts suspenders of front wheels of Mercedes-Benz W203.
1 - Top bearing part
2 - Screw spring
3 - Connecting bar
4 - Absorber
5 - Cross-section communication (the rear cross-section lever)
6 - Antiroll bar
7 - Extension (the front cross-section lever)
8 - Track rod
9 - Swivel member
10 - Amortization rack
11 - Cross bar
12 - Steer

The front suspension of Mercedes-Benz W203 in the form of triangular cross-section levers from each party has amortisation racks McPherson and torsion an antiroll bar. As the third lever of a front suspension the track rod connecting a steer with wheels serves. Amortisation racks of Mercedes-Benz W203 consist from spare parts: cylindrical screw springs, absorbers in the form of a double tube and the top bearing parts of the big size. The stabilizer does not participate in a direction of wheels, and through connecting bars is connected with amortisation racks. Optimum running characteristics and the minimum deterioration of tyres it is reached only in that case when wheels occupy correct position. At wrong deterioration of tyres, and also at insufficient stability on road it is necessary to make optical measurements and, if necessary, to adjust wheel alignment angles.

Repair of a rack of a suspender of front wheels of Mercedes-Benz W203.



Fig.2.Spare parts an amortisation rack of suspender of front wheel of Mercedes-Benz W203.
1 - Nut М14 х 1.5, 60Нм
2 - Hollow disk
3 - Thrust block
4 - Nut, 20Нм, self-stopped, necessarily replace 5 -Rubber gasket
6 - Bearing part of an amortisation rack
7 - Nut, 40Нм
8 - Bolt, 110Нм, 2 pieces
9 - Nut, 200Нм
10 - Buffer of a course of compression
11 - Screw spring
12 - Holder
13 - Absorber
14 - Bolt




Attention! For performance of repair the spring compressor is required to you. Do not try to remove a spring without a remover - you can receive a serious trauma and damage the car. Before remover installation attentively read a management on its operation, prepare necessary spare parts. If you do not prepare to remove a remover from a spring after its removal from a rack, place it in a safe place.
Replacement procedure spare parts racks of a suspender of front wheels of Mercedes-Benz W203 in detail look here: http://mersedesspareparts.50webs.com
----------------------------------------------------------------------------------------------------

Mercedes Spare Parts: cover of head of the cylinder block of Mercedes-Benz W124 1985-1995.

----------------------------------------------------------------------------------------------------
Removal of cover of head of the cylinder block of Mercedes-Benz W124 is carried out for the layer pad control, others spare parts and resettings of valves.
PERFORMANCE ORDER
1. Remove wire of weight from the accumulator.
2. Open a cowl and establish it in vertical position.
3. On engines with turbocharger remove an air vent connecting turbocharger with an intake manifold.





Fig.1. Spare parts heads of the cylinder block of Mercedes-Benz W124.
1 - cylinder block head;
2 - bearing cap;
3 - vortical chamber;
4 - nut of fastening of the vortical chamber;
5 - directing valves;
6 - oil catch caps;
7 - saddles of valves;
8 - cover of head of the cylinder block;
9 - cover gasket of a head of the cylinder block



4. Slacken loose strap also remove hose of ventilation of crankcase from a cover of head of the cylinder block.
5. Unscrew bolts and remove cover of head of the cylinder block. Remove layer pad.
6. Inspect parts and prepare new spare parts for replacement.

Installation
PERFORMANCE ORDER
1. Installation of all spare parts is made in sequence, return to removal. If necessary replace a cover gasket of a head of the cylinder block.
----------------------------------------------------------------------------------------------------