Mercedes Spare Parts:Spare parts of clutch Mercedes C-class W202.

Today Mercedes Spare Parts tells about mercedes spare parts Mercedes C-class W202. Accessories mercedes spare parts clutches Mercedes C-class W202 is the press the clutch plate, a clutch plate (a spent disk) and a hydraulic control system. Press and spent disks are located on engine flywheel engine Mercedes C-class W202 wheel. The full list mercedes spare parts Mercedes C-class W202 can be found a clutch plate in Archive Mercedes Spare Parts.




Fig.1. Spare parts of clutch Mercedes C-class W202.
1. Сlutch disk
2. Press a disk
3 Bearing clutch deenergizing
4. Plug of deenergizing of clutch
5. Screw with internal six cut, 25 Н.м.






Press it is connected with flywheel a wheel which is screwed together with turned mine of the engine. Between a disk of the press of clutch which is wrung out by a disk of the press of clutch toflywheel to a wheel. A spent disk the ally the gear primary mine of drive Mercedes C-class W202.
Read more...
-------------------------------------------------------------------------------------------------------------------

Mercedes Spare Parts: Assemblage of salon of cars of the C-class

Fig.1.Mercedes spare parts: seating of the basic knots of interior
1. Covering
2. Hooks
3. Keeping clips
4. Plug-in clip
5. Shelf for hats
6. Bolt
7. Detail of fastening of a seat belt

Assemblage spare parts of salon of cars of the mercedes C-class is executed carefully, only separate ordinary-looking plastic spare parts spoil impression a little. In Mercedes of all years of release a sled of the hatch of a roof is badly adjusted, occurrence of scratches in an operating time of a drive of the hatch is possible. Besides, in all cars there can be a noise at work systems of ventilation of salon, and also deformation (swelling) of the top part of plastic at the basis of forward lateral glasses after 1-2 years of operation. Last phenomenon is especially characteristic for cars of release of 1993.Mercedes Spare Parts gives a good advice on selection and replacement mercedes spare parts, for improvement of quality of assembly of interior.
Read more...

----------------------------------------------------------------------------------------------

Mercedes Spare Parts: repair of suspender of front wheels of Mercedes-Benz W203 2000-2007.

----------------------------------------------------------------------------------------------------

C-class The second generation has been presented public in 2000. The sedan debuted with petrol V5 and V6, and diesel engine V4 and V5. V6 engines have been inherited from previous S-series W202. However, volumes of engines have been increased with 2.6 L. To 3.2 L. With the increased capacity in 215 h.p. Mechanical box with 6 drives was equipped practically on all models (except for C320 and C270CDI). C-class It was updated in the beginning of 2004. This year the interior has endured change in all three types of models. New tail lights have been offered on Sportcoupe and some new engines have appeared later this year. New C350 reached capacities in 268 h.p., and C320 CDI in 221 h.p. New engines were equipped with an automatic transmission under the name 7G-TRONIC. The semi-automatic box went as an option. C32 AMG it has been replaced new 5.5 V8 C55AMG. The engine was the modifed version with E-class'a with capacity in 362 h.p.The maximum speed has been limited by electronics to 250 km/h, and 100 km/h was reached for 4.8 seconds. As always a wide number mersedes spare parts was offered.
The suspender of front wheels consists of the following spare parts.
Fig.1. Spare parts suspenders of front wheels of Mercedes-Benz W203.
1 - Top bearing part
2 - Screw spring
3 - Connecting bar
4 - Absorber
5 - Cross-section communication (the rear cross-section lever)
6 - Antiroll bar
7 - Extension (the front cross-section lever)
8 - Track rod
9 - Swivel member
10 - Amortization rack
11 - Cross bar
12 - Steer

The front suspension of Mercedes-Benz W203 in the form of triangular cross-section levers from each party has amortisation racks McPherson and torsion an antiroll bar. As the third lever of a front suspension the track rod connecting a steer with wheels serves. Amortisation racks of Mercedes-Benz W203 consist from spare parts: cylindrical screw springs, absorbers in the form of a double tube and the top bearing parts of the big size. The stabilizer does not participate in a direction of wheels, and through connecting bars is connected with amortisation racks. Optimum running characteristics and the minimum deterioration of tyres it is reached only in that case when wheels occupy correct position. At wrong deterioration of tyres, and also at insufficient stability on road it is necessary to make optical measurements and, if necessary, to adjust wheel alignment angles.

Repair of a rack of a suspender of front wheels of Mercedes-Benz W203.



Fig.2.Spare parts an amortisation rack of suspender of front wheel of Mercedes-Benz W203.
1 - Nut М14 х 1.5, 60Нм
2 - Hollow disk
3 - Thrust block
4 - Nut, 20Нм, self-stopped, necessarily replace 5 -Rubber gasket
6 - Bearing part of an amortisation rack
7 - Nut, 40Нм
8 - Bolt, 110Нм, 2 pieces
9 - Nut, 200Нм
10 - Buffer of a course of compression
11 - Screw spring
12 - Holder
13 - Absorber
14 - Bolt




Attention! For performance of repair the spring compressor is required to you. Do not try to remove a spring without a remover - you can receive a serious trauma and damage the car. Before remover installation attentively read a management on its operation, prepare necessary spare parts. If you do not prepare to remove a remover from a spring after its removal from a rack, place it in a safe place.
Replacement procedure spare parts racks of a suspender of front wheels of Mercedes-Benz W203 in detail look here: http://mersedesspareparts.50webs.com
----------------------------------------------------------------------------------------------------